LX/Colibri/Filser Connection Info

  1. Ensure that the serial connection/cable between the PDA and device is correct.
  2. NOTE: The transfer is ALWAYS initiated from SP.
  3. Ensure that the Data Xfer speed on the NMEA/Port Settings screen in SP matches the serial speed in the logger. There is no auto-negotiation of transfer speeds.
  4. Try to get the list of the flight logs. This is done through the Transfer Screen.
  5. NOTE: When the Palm initiates the serial communication, the logger should beep 3 times.
  6. If the flight logs are displayed correctly, you should be able to then transfer the selected flight log from the device.
  • The following devices need to use “Filser” as the computer type to download valid IGC files.
    • Filser LX20 first batch
    • Filser LX20 with RSA security
    • Filser LX20-2000
    • Filser LX21
    • Filser DX50
    • Filser LX5000IGC
  • The following devices need to use “LX” as the computer type to download valid IGC files.
    • LX Navigation Colibri V1.0
    • LX Navigation Colibri V4
    • LX Navigation Colibri 4F with Flarm
    • LX Navigation LX7000
    • LX Navigation LX7007
    • LX Navigation LX7007F with Flarm
 
soarpilot/lx_colibri_filser_connection.txt · Last modified: 2007/12/19 03:53 by pgleesonuk
 
Recent changes RSS feed Creative Commons License Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki